How to Mount an Inverted Pedal Rack V2 on Your Sim Rig

By Sim-Lab - Making motorsports accessible | Published: 2026-10-22

Category: How-to Guides

Step-by-step guide to mounting the Inverted Pedal Rack V2 on your Sim-Lab cockpit. Covers preparation, alignment, and common mistakes to avoid for a solid inverted pedal setup.

Quick answer

Mount the Inverted Pedal Rack V2 by first securing the rack to your cockpit's pedal deck, then attaching your pedals and adjusting the pedal plate angle and height for a comfortable inverted position.

Why choose an inverted pedal rack

An inverted pedal rack positions your pedals upside-down, mimicking a real race car's setup. This can improve heel-toe shifting and provide a more natural driving position, especially for GT-style rigs. The Inverted Pedal Rack V2 is a community-driven update that offers broad pedal compatibility and integrates seamlessly with Sim-Lab cockpits like the GT1 Evo, P1X Pro, and others.

What you need before starting

You'll need the Inverted Pedal Rack V2, your pedals, the appropriate bolts and tools (typically metric hex keys and a socket set), and access to your cockpit's pedal mounting area. The rack is designed to be rigid and adjustable, but ensure your cockpit has the correct mounting points for the V2's updated design.

Mounting steps

1. Prepare the cockpit mounting area: Remove any existing pedals or pedal plate from your cockpit. Clean the mounting surface and ensure the cockpit's pedal deck is level. If your rig uses a pedal slider baseplate, adjust it to a comfortable starting position before proceeding. Check that the cockpit's mounting holes align with the V2 rack's pattern. If not, you may need additional brackets or drilling.
2. Attach the Inverted Pedal Rack V2 to the cockpit: Position the rack on the pedal deck so the pedal mounting brackets face upward (inverted). Use the supplied bolts to secure the rack to the cockpit's mounting points. Tighten to the recommended torque, but do not overtighten as this can strip threads. Common mistake: Forgetting to leave access to adjustment screws. Ensure the rack is positioned so you can reach the pedal plate angle and height adjusters later.
3. Mount your pedals to the rack: Attach your pedals to the inverted pedal brackets using the appropriate hardware. Ensure the pedals are oriented correctly (upside-down) and that the brake and throttle are on the correct sides. Tighten securely. Check that the pedal faces do not contact the cockpit frame when fully depressed. If they do, adjust the pedal plate angle or shim the rack.
4. Adjust pedal plate angle and height: Loosen the adjustment bolts on the rack and tilt the pedal plate to your preferred angle (typically 10-20 degrees from horizontal). Adjust the height so your heels rest comfortably on the floor or a heel plate. Tighten all bolts once set. Test the pedals with your driving shoes. If your knees feel cramped or your ankles are strained, readjust the angle and height.
5. Final check and cable management: Verify all bolts are tight and the rack is secure. Route pedal cables neatly along the cockpit frame, using zip ties or cable clips to prevent snagging. Plug in your pedals and test the input in your sim software. Common mistake: Leaving cables loose that could catch on your feet or the rig during driving. Secure them away from moving parts.

Product fact

Inverted Pedal Rack V2: Redesigned as V2 to match current design language and material standards, offering broad pedal compatibility. This means the rack works with many pedal brands and is built to the same quality as your Sim-Lab cockpit, ensuring a solid mount without modifications.
Inverted Pedal Rack V2